What is the price of a used Tsunami Walking Machine?
The price of used Tsunami centring machines varies due to a variety of factors, the following is the general situation:
a.
BO205 series by model
: such as BO205-III, the general price of 50,000 to 100,000 yuan or so. This series of centring machine is suitable for processing smaller size precision parts, such as small shafts, sets of parts, etc., in some small precision machining enterprises or electronic parts processing enterprises in the application of more.
BO265 series: like BO265-II, the price is usually around 80,000 RMB to 150,000 RMB. The processing diameter of this type of centrifugal machine is relatively large, can process parts with a diameter of 8-26mm, there is a certain increase in processing capacity and accuracy, commonly used in the processing of slightly larger size of precision parts, such as small mechanical parts, medical equipment parts.
BO325 Series: The price of used BO325-II is around 100,000 RMB to 200,000 RMB. This series has excellent performance in processing accuracy and stability, can meet the higher precision requirements of parts processing, applicable to aerospace, automotive parts and other areas of high precision requirements.
Second, according to the degree of newness
about 80% new: the price is generally about 40% -60% of the price of new equipment. For example, if the price of a new Tsugami BO265-II centring machine is about 300,000 RMB, then the price of the same machine in 80% new condition may be between 120,000 RMB and 180,000 RMB.
90% new and above: the price may reach about 60%-80% of the price of new equipment. For some of the use of a shorter period of time, better maintained 90% new equipment, its price is relatively high, but the performance and accuracy is also closer to the new equipment.
Third, according to the configuration of the
standard configuration: usually the price is near the lower limit of the above price range. The standard configuration of the second-hand Jinshang centring machine can meet the basic processing needs, applicable to some of the processing requirements are not particularly high enterprises or processing tasks.
High-configuration models: Used centring machines with advanced configurations such as automatic feeding devices, special tooling systems, high-precision measuring systems, etc., may be priced at about 20%-50% higher than standard configurations. These high-compatibility models have greater advantages in processing efficiency, precision and automation, etc., and are suitable for enterprises with higher requirements for processing quality and productivity.
