TOSHIBA MPF2640DS Gantry machining centre

X-axis travel (longitudinal direction of Worktable) : 4000 mm
Y-axis travel (lateral of the headstock) : 3000 mm
Z-axis travel (vertical spindle) : 1250mm
Worktable size: approximately 4200 × 2800 mm
Double-column span (maximum workpiece width) : 2600 mm
The maximum load of Worktable: approximately 40,000 kg
spindle taper: BT50 or 190mm long nose end (suiWorktable for heavy-duty large-diameter mill)
Fast moving rate: approximately 30 m/min (X/Y axis)
Spindle speed: 10,000 RPM